Right operating side SLMST MASTERCUT 1250 / 1500

Right operating side SLMST MASTERCUT 1250 / 1500

As an alternative, the machine may be controlled from the right operating side.

Additional paired blades

Additional paired blades

In addition to the standard set of 4 paired blades, the machine may be extended to a max. of 10 pairs of blades (depending on material).

Double guide roller to feed the material gently

Double guide roller to feed the material gently

A pair of guide rollers in front of the intake guides facilitate the infeed of material to the slitting machine. This prevents damage to the material (e.g., bending of the strip material in front of the machines intake area).

Protective foil coater SFB (not driven)

Protective foil unwinder (not driven)

The protective film unwinder can unwind a self-adhesive protective film and apply to the top surface of the material.

Feed table (liftable)

Feed table (liftable)

Table for supporting unwieldy material. The stainless steel surface can be pneumatically lifted (working pressure 8 bar). It gets controlled using the central PLC unit of the slitting and cross-cutting system.

Run-out table

Run-out table

Table with stainless steel surface for laying down panels after cutting. The welded construction in combination with four heavy duty castors (2x with locking brakes) ensures high stability. For attachment purposes, mechanic swivelling hooks are used. Magnetic safety switches are installed to verify the position of the table.

Decoiler AH1250A1 (only Multicut 1250)

Decoiler AH1250A1

A decoiler for metal coils with a max. weight of 1,000 kg and a max. coil width of 1,250 mm. The decoiler consists of a welded frame and a continuously adjustable mandrel on ball bearings with centre adjustment. The clamping range of the mandrel ranges from a min. of 280 mm to a max. of 530 mm inner coil diameter (optionally up to 650 mm). The manual braking assembly prevents metal coil overtravel. The decoiler is mobile because the decoiler is equipped with four swivelling castors. Extendable supports may be used to clamp the decoiler on site.

Decoiler AH1250K5 (only Multicut 1250)

Decoiler AH1250K5

A decoiler for metal coils with a max. weight of 5,000 kg and a max. coil width of 1,250 mm. The decoiler consists of an exceptionally stable welded frame and a continuously adjustable mandrel on ball bearings with centre adjustment. The clamping range extends from a min. of 380 mm to a max. of 530 mm inner coil diameter. A standard braking assembly prevents metal coil overtravel.

Decoiler AH1500K5 (only Multicut 1500)

Decoiler (AH1500K5)

A decoiler for metal coils with a max. weight of 5,000 kg and a max. coil width of 1,500 mm. The decoiler consists of an exceptionally stable welded frame and a continuously adjustable mandrel on ball bearings with centre adjustment. The clamping range extends from a min. of 380 mm to a max. of 530 mm inner coil diameter. A standard braking assembly prevents metal coil overtravel.